Comtrol MC7001 User Manual download pdf

Note: After adjusting the DIP-switch, reboot the MC7001 to activate the new settings.

DIP 4

DIP 3

DIP 2

DIP 1

123

Pin Nr. # Status Description

Off

Set Switch converter mode. (Default)

Set pure converter mode.

Off

Set Fiber port in Full-duplex mode. (Default)

Set Fiber port in Half-duplex mode.

Off

Set RJ45 in Auto-Negotiation mode. (Default)

Set RJ45 in 100Mbps Full-duplex mode.

Off

Disable Link Loss Forwarding function. (Default)

Enable Link Loss Forwarding function.

DIP Switch Setting

LED Functions

LED Function

Lit when the MC7001 has proper input power and is operational.

Lit when the Ethernet connection is established on the RJ45 port.

Blinks when data is transmitted or received on the RJ45 port.

Lit when the fiber Ethernet connection is established on the fiber port.

Blinks when data is transmitted or received on the fiber port.

2000505 Rev. B www.comtrol.com

Quick Installation Guide

www.comtrol.com

2000505 Rev. D

Comtrol Customer Service

Contact Method Web Address or Phone Number

Support http://www.comtrol.com/pub/en/support

Downloads ftp://ftp.comtrol.com/html/default.htm

Web Site http://www.comtrol.com

Phone 763.957.6000

The following table provides information about optical fiber cable attenuation:

Fiber Type Wavelength Attenuation /km *1 Attenuation /km *2

Connector

Loss

Splice

Loss

Multi-Mode

50/125um

850nm

1310mm

3.5dBm

1.5dBm

2.5dBm

0.8dBm 0.75dBm 0.1dBm

Multi-Mode

62.5/125um

850nm

1310nm

3.5dBm

1.5dBm

3.0dBm

0.7dBm 0.75dBm 0.1dBm

Single-Mode

9/125um 1310nm 0.4dBm 0.35dBm 0.75dBm 0.1dBm

Single-Mode

9/125um 1550nm 0.3dBm 0.22dBm 0.75dBm 0.1dBm

*1. These values are per TIA/EIA and other industrial specifications.

*2. These values are an example of the performance that can be obtained with a new fiber installation.

ROCKETLINX MC7001

Industrial Ethernet to Fiber Media Converter

1 2 3 4 5 6

Summary of Contents

Page 1 - ROCKETLINX MC7001

Note: After adjusting the DIP-switch, reboot the MC7001 to activate the new settings.DIP 4DIP 3 DIP 2DIP 14NO123Pin Nr. # Status DescriptionOffSet Swi

Page 2 - The MC7001 provides

The RocketLinx MC7001 industrial Ethernet to fiber media converter conforms to IEEE 802.3 and IEEE 802.3u standards with one 10/100BASE-TX and one 100

Page 3

The RocketLinx MC7001 industrial Ethernet to fiber media converter conforms to IEEE 802.3 and IEEE 802.3u standards with one 10/100BASE-TX and one 100

Page 4

The RocketLinx MC7001 industrial Ethernet to fiber media converter conforms to IEEE 802.3 and IEEE 802.3u standards with one 10/100BASE-TX and one 100

Page 5

Note: After adjusting the DIP-switch, reboot the MC7001 to activate the new settings.DIP 4DIP 3 DIP 2DIP 14NO123Pin Nr. # Status DescriptionOffSet Swi

Page 6

Note: After adjusting the DIP-switch, reboot the MC7001 to activate the new settings.DIP 4DIP 3 DIP 2DIP 14NO123Pin Nr. # Status DescriptionOffSet Swi

Comments to this Manuals

No comments

Comtrol MC7001 User Manual

Browse online or download User Manual for Accessories communication Comtrol MC7001. Comtrol MC7001 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories communication Comtrol MC7001