Comtrol NS-link Windows NT User Manual download pdf (Page 60)

100

60 Device Configuration

Device Advisor Driver Messages

- Loaded OK/Total indicates the ratio of successful loads to load attempts.

The rightmost, or Total, number indicates the number of times the system

tried to load NS-Link, while the left most number indicates the number of

times that NS-Link activated successfully after loading. Ideally, these two

numbers should be the same.

- Devices Detected/Avail indicates the number of NS-Link devices currently

attached to the network, and the number of devices currently available to

be acquired by this server.

For example, if you have one device installed, and it is not currently

configured on any server, then the value displayed is 1/1. But if you have

one device installed, and it is currently configured on a server, then the

value displayed is 1/0.

Device Advisor

Driver Messages

The following tables provide information about device driver summary messages

and reported state messages.

Message Description

Active

The normal state for NS-Link device that is

attached to a server and is ready for data traffic.

Cannot detect any NS-Link.

Network traffic is being received, but not from a

NS-Link device. Check the network connections

and verify that the NS-Link device is powered up.

Cannot detect network

No inbound traffic of any sort NS-Link device may

be inoperative or you may have a network cabling

problem.

Cannot detect NS-Link with

specified MAC address.

Network traffic is being received from a NS-Link

device, but not the one specified in the Network

Connection tab. Check the device to make sure

that you are using the correct MAC address and

check the General tab to verify that you are

working with the correct device.

Connect

The server has completed the download and is

completing initialization.

Counts reset.

This message displays immediately after you click

the Reset button.

Init

This is the normal state for undetected and

inactive NS-Link device.

InitOwn

The server has acquired the NS-Link device but

has not downloaded the control software.

Invalid

An illegal NS-Link device state has been detected.

Reset the NS-Link device.

Not found

The specified MAC address is not configured on

this server.

NS-Link active.

Normal state: the NS-Link device is installed

correctly and active with data traffic.

NS-Link detected,

initializing.

The server has acquired the NS-Link device and is

downloading the control program. The device will

be available shortly.

NS-Link device detected and

configured for this server, but

is not yet assigned to this

server.

Either the NS-Link device is currently being

controlled by another server or the device power

has been cycled and the device is waiting for a

server to acquire it.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 99 100

Comments to this Manuals

No comments

Comtrol NS-link Windows NT User Manual Page 60

Comments to this Manuals

Related products and manuals for Software Comtrol NS-link Windows NT